AG SPRAY & GUIDANCE
- SPRAYERS
- PUMPS
- CAMERA & GUIDANCE SYSTEMS
- POLY TANK FITTINGS, LIDS AND ACCESSORIES
- SPRAY CONTROLLERS
- SPRAY GUNS
- SPRAY TIPS & NOZZLES
- BOOM COMPONENTS & CAPS
- TIP MONITORS
- CAM LEVER COUPLERS
- MANIFOLD FLANGE FITTINGS by BANJO
- SUCTION & LINE STRAINERS
- HOSE AND CLAMPS
- HOSE AND PIPE FITTINGS
- VALVES
- PRESSURE GAUGES
- SPRAYER SAFETY
- ALUMINUM CAM LEVER COUPLERS
AG SPRAY & GUIDANCE
1664 products
Showing 1 - 24 of 1664 products
Display
View

Banjo
1-1/4X1 POLY REDUCING NIPPL
SKU: 909-RN125100
Thread Size 1-1/4" x 1" Connection FPT, Polypropylene, Max Pressure 150 PSI, Temp Range -20 to 150 Deg. F. Color Black
In stock, 325 units
Thread Size 1-1/4" x 1" Connection FPT, Polypropylene, Max Pressure 150 PSI, Temp Range -20 to 150 Deg. F. Color Black
Sale price$3.35

TeeJet
POLY SPRAY TIP #12 ADJ USTABLE
SKU: 878-5500PPBX12
#12 Nozzle for 22670 and others
In stock, 162 units
#12 Nozzle for 22670 and others
Sale price$5.45

Banjo
3" EPDM GASKET BANJO
SKU: 909-300G
Gasket, Size 3 In, Material of Construction EPDM, Max Pressure 75 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings. Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Meet ASTMC 38000 and MIL-C-27487F specifications.
In stock, 1660 units
Gasket, Size 3 In, Material of Construction EPDM, Max Pressure 75 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings. Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Meet ASTMC 38000 and MIL-C-27487F specifications.
Sale price$1.44

Ace
ACE HYDRAULIC CENTRIFUGAL PUMP
SKU: 014-FMC150HYD206
Frame Mounted Centrifugal Pump. Has 1.5" inlet and 1.25" discharge. Pumps up to 135 gpm at 120 psi with 7 GPM hydraulic fluid input. Fits all tractor hydraulic systems. Recommended for Open Center Systems with capacities from 7-16 GPM.
In stock, 82 units
Frame Mounted Centrifugal Pump. Has 1.5" inlet and 1.25" discharge. Pumps up to 135 gpm at 120 psi with 7 GPM hydraulic fluid input. Fits all tractor hydraulic systems. Recommended for Open Center Systems with capacities from 7-16 GPM.
Sale price$968.50

Banjo
40 MESH SCREEN
SKU: 909-LS740
Size 1/2 - 3/4 In, For Use With 3DTZ3, 3DTZ6
In stock, 6 units
Size 1/2 - 3/4 In, For Use With 3DTZ3, 3DTZ6
Sale price$25.18

Banjo
50 MESH SCREEN 3" STRAINER
SKU: 909-LS350
Standard Mesh Data (For General Use ONLY): 50 Mesh, 297 Microns, 0.009" Wire Diameter, 0.011" Opening Size, 30.3% Open Area.
In stock, 6 units
Standard Mesh Data (For General Use ONLY): 50 Mesh, 297 Microns, 0.009" Wire Diameter, 0.011" Opening Size, 30.3% Open Area.
Sale price$149.86

Banjo
BANJO 50 MESH SCREEN-1.5"&2"
SKU: 909-LS250
50 Mesh Replacement Screen for 1- 1/2" - 2" Strainers
In stock, 102 units
50 Mesh Replacement Screen for 1- 1/2" - 2" Strainers
Sale price$49.96

Banjo
20 MESH STAINLESS STEEL SCREEN
SKU: 909-LS220
Standard Mesh Data (For General Use ONLY): 20 Mesh, 841 Microns, 0.016" Wire Diameter, 0.034" Opening Size, 46.2% Open Area.
In stock, 43 units
Standard Mesh Data (For General Use ONLY): 20 Mesh, 841 Microns, 0.016" Wire Diameter, 0.034" Opening Size, 46.2% Open Area.
Sale price$49.96

Banjo
80 MESH SCREEN 1"&1-1/4" STRAINER
SKU: 909-LS180
Screen, 80 Mesh, For Y Strainer, Size 1 - 1- 1/4 In. For use with 3DUA2, 3DUC2.
In stock, 24 units
Screen, 80 Mesh, For Y Strainer, Size 1 - 1- 1/4 In. For use with 3DUA2, 3DUC2.
Sale price$25.18

Banjo
NEW STYLE O RING FOR 1-1/2&2' SRAINER
SKU: 909-LS150G
Gasket, For Y Strainer, Size 1-1/2 - 2 Inch, For Use With 3DUA9, 3DUC1, 3DUC2, 3DUC5, 3DUC6, 3DUC7 Polypropylene Y-Type Strainers, Gaskets, and Screens. Protect piping systems from debris, dirt, and rust. Fiberglass-reinforced polypropylene strainers have a removable end cap and poly-ribbed 316 stainless steel screens. EPDM gaskets.Maximum pressure: 150 PSI (1/2 inch to 1-1/4 inch), 150 PSI (1-1/2 inch to 2 inch).
In stock, 197 units
Gasket, For Y Strainer, Size 1-1/2 - 2 Inch, For Use With 3DUA9, 3DUC1, 3DUC2, 3DUC5, 3DUC6, 3DUC7 Polypropylene Y-Type Strainers, Gaskets, and Screens. Protect piping systems from debris, dirt, and rust. Fiberglass-reinforced polypropylene strainers have a removable end cap and poly-ribbed 316 stainless steel screens. EPDM gaskets.Maximum pressure: 150 PSI (1/2 inch to 1-1/4 inch), 150 PSI (1-1/2 inch to 2 inch).
Sale price$4.29

Banjo
40 MESH SCREEN FOR 1 & 1.25" STRAINER
SKU: 909-LS140
O-Ring part # 909-LS125G.
In stock, 22 units
O-Ring part # 909-LS125G.
Sale price$27.70

Banjo
O RING FOR 3/4" STRAINER
SKU: 909-LS075G
Cap Gasket for 3/4" Strainer
In stock, 19 units
Cap Gasket for 3/4" Strainer
Sale price$3.25

Banjo
BANJO CAST IRON PUMP ONLY
SKU: 909-200POI
Technical Specification Item Centrifugal Pump Head Type Engine Driven Connection 2 x 2 Engine/Motor Type Gas GPH 11400 NPT Port (In.) 2 Length (In.) 10-1/2 Width (In.) 8-1/2 Height (In.) 13 Material of Construction: Cast Iron Impeller Cast Iron. Impeller Type: Open Seal Material: Carbon Ceramic. Maximum Pressure PSI 45, Engine RPM 3600, GPM of Water @ 10 Ft. of Head 150 GPM of Water @ 20 Ft. of Head 147 GPM of Water @ 30 Ft. of Head 130 GPM of Water @ 40 Ft. of Head 115 GPM of Water @ 50 Ft. of Head 90, Max. Flow 190 Max. Head (Ft.) 50 Max. Suction Lift (Ft.) 15 Casing Adapter Cast Iron Volute/Wear Plate Cast Iron Mechanical Seal EPDM/Carbon Ceramic Check Valve. Number of Impellers: 1, Temp. Range (F) 32 Degrees to150 Degrees, Self-Priming: Yes, Compliance & Restrictions Compliance and Restrictions: None. This listing is for each.
Only 1 unit left
Technical Specification Item Centrifugal Pump Head Type Engine Driven Connection 2 x 2 Engine/Motor Type Gas GPH 11400 NPT Port (In.) 2 Length (In.) 10-1/2 Width (In.) 8-1/2 Height (In.) 13 Material of Construction: Cast Iron Impeller Cast Iron. Impeller Type: Open Seal Material: Carbon Ceramic. Maximum Pressure PSI 45, Engine RPM 3600, GPM of Water @ 10 Ft. of Head 150 GPM of Water @ 20 Ft. of Head 147 GPM of Water @ 30 Ft. of Head 130 GPM of Water @ 40 Ft. of Head 115 GPM of Water @ 50 Ft. of Head 90, Max. Flow 190 Max. Head (Ft.) 50 Max. Suction Lift (Ft.) 15 Casing Adapter Cast Iron Volute/Wear Plate Cast Iron Mechanical Seal EPDM/Carbon Ceramic Check Valve. Number of Impellers: 1, Temp. Range (F) 32 Degrees to150 Degrees, Self-Priming: Yes, Compliance & Restrictions Compliance and Restrictions: None. This listing is for each.
Sale price$520

Banjo
BANJO VITON SEAL ASSEMBLY
SKU: 909-18025
Replacement Parts
In stock, 12 units
Replacement Parts
Sale price$125.46

farmranchstore
PUMP HOUSING
SKU: 909-17026
Banjo 17026 2" Pump Housing, Cast Iron is selected for its price and quality among Enerpac ZE3308SB 115 Volt Electric Pump with Valve VE33 and Liquid Crystal Display (maintenance and repair applications - the 1 - and can operate at low voltages - suitable for lifting applications - low-voltage warning information - protect), Industrial Grade 5RWL9 Suction Strainer, 1-1/2 In. NPSM Inlet (round perforations, 9-1/2 in dia - suction port of drainage pumps), Pentair SCC9200220M-01 Single Phase Sewage Pump, 2 HP, 230-Volt (operates at 2-horsepower, 230-volt - single phase sewage pump - , 230-volt),Banjo 17406 Impeller Shaft (impeller shaft -replacement parts - replacement part for banjo pumps and liquid handling products - banjo offers many liquid handling products for a large).
Only 1 unit left
Banjo 17026 2" Pump Housing, Cast Iron is selected for its price and quality among Enerpac ZE3308SB 115 Volt Electric Pump with Valve VE33 and Liquid Crystal Display (maintenance and repair applications - the 1 - and can operate at low voltages - suitable for lifting applications - low-voltage warning information - protect), Industrial Grade 5RWL9 Suction Strainer, 1-1/2 In. NPSM Inlet (round perforations, 9-1/2 in dia - suction port of drainage pumps), Pentair SCC9200220M-01 Single Phase Sewage Pump, 2 HP, 230-Volt (operates at 2-horsepower, 230-volt - single phase sewage pump - , 230-volt),Banjo 17406 Impeller Shaft (impeller shaft -replacement parts - replacement part for banjo pumps and liquid handling products - banjo offers many liquid handling products for a large).
Sale price$270.97

AgSmart
ALUMINUM TRANSFER PUMP 1" IN/OUT
SKU: 900-WP25
2 cycle engine, 2.5 HP, 7500 rpm. Lightweight, only 16 pounds.
In stock, 124 units
2 cycle engine, 2.5 HP, 7500 rpm. Lightweight, only 16 pounds.
Sale price$167.14

Banjo
VITON SEAL FOR BANJO CAST IRON
SKU: 909-17035
Viton-type Seal Assembly - Replacement Parts
In stock, 18 units
Viton-type Seal Assembly - Replacement Parts
Sale price$79.47

AgSmart
POLY PUMP SEAL ASBY-BUNA-NEW
SKU: 900-IM12713BN
For Agsmart 265PF pump. Has rubber boot on seal OD.
Sold out
For Agsmart 265PF pump. Has rubber boot on seal OD.
Sale price$4.47
Filters (0)
Main menu