AXLE AND STEERING

AXLE AND STEERING

349 products

Showing 1 - 24 of 349 products
View
BUSHING
TISCO BUSHING SKU: 182850M1
Front pivot support bushing, flanged. For swept back axles. Tractors: TE20, TO20, TO30, TO35, MF35, MF135, MF235. Industrial: 20, 2135. 2.075" O.D., 1.750", .820" long.
$13.07
 In stock, 19 units
AXLE PIN
TISCO AXLE PIN SKU: 183221M1
Pivot pin for swept back axles. 1-3/4 inch O.D., 4-3/4 inch long. Has 7/8 inch dia. bolt hole & 1 inch dia. crank hole. Tractors: TO20, TO30, TO35, MF35, MF135 (prior to s/n 9A86902). Industrials: 20 (prior to s/n 9A86902), 2135 turf & narrow. Replaces 193746M1. Use with flanged axle bushing 182850M1.
$48.28
 In stock, 50 units
AXLE BOLT
TISCO AXLE BOLT SKU: 523387M1-L
Lock bolt for adjustable front axles. Tractors: F40, MH50, MF50, MF65, MF150, MF175, MF230 (s/n 9A243032 & up), MF245 semi-swept, MF255, MF265, MF275. Industrials: 20C, 30, 31, 3165 turf. Can replace 182501M1. Usable length 3-3/4 inch, 5-1/8 inch overall, 3/4 inch-16 thread.
$4.98
 In stock, 51 units
COLLAR BRAKE PIN
TISCO COLLAR BRAKE PIN SKU: NCA22218A
Collar, brake shoe anchor pin. 1" O.D., ¾" I.D., 9/16" Wide. Tractors: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964).
$1.46
 In stock, 55 units
BRAKE REPR KIT
TISCO BRAKE REPR KIT SKU: 8NAA2250
Brake repair kit, less shoes. Tractors: 8N (1948 to 1952), NAA (1953 to 1954). Contains:2-8N2027B anchor, 1-8N2048 socket, 1-8M2049 spring, 1-NCA2204A spring, 1-8N2217 dust seal, 1-8N2297B spring, 1-8N2299 spring, 1-H2041SCRW screw, 1-8N2223 nut.
$40.83
 In stock, 20 units
SPRING
TISCO SPRING SKU: 8N2297B
Spring, brakeshoe retracting.
$4.13
 In stock, 394 units
BOLT
TISCO BOLT SKU: 893017M2
Stud, rear wheel. 5/8"-18 thread, 2.150" long. Tractors: MF35 & MF135 orchard, MF150 (row crop with planetary), MF235, MF245 orchard, MF255, MF265, MF275, MF165, MF175, MF180 (with wet or dry brakes). 5/8"-18 thread, 2.150" length.
$70.17
 Only 1 unit left
HARDWARE KIT 4 PCS
TISCO HARDWARE KIT 4 PCS SKU: 350789-KIT
Bolt kit, front axle bolt, nut & washer. Holds right and left axles to center axle. Tractors: 9N, 2N, 8N {1939-1952}.
$16.30
 Only 2 units left
SPACER BHTWK-9
TISCO SPACER BHTWK-9 SKU: 209BH
2-Spacers
$2.61
 Only 2 units left
CASTER WHL&HUB
farmranch CASTER WHL&HUB SKU: 12834
Tail wheel and hub kit with grease fitting, one each. Contains two 12250 bearings, two 12261 wear washer, one 20123BH bolt, one 15622BH nut, one 12268 hub assembly, four 20054BH capscrew, four 15806 lockwasher, one 12263 spacer, one 500BH tail wheel assembly, one GF4100 grease fitting.
$142.74
 Only 4 units left
1" BUSHING FOR TAIL WHEEL HUB
AgSmart 1" BUSHING FOR TAIL WHEEL HUB SKU: 688-B1
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 1" I.D.
$4.30
 In stock, 312 units
3/4" BUSHING FOR TAIL WHEEL HUB
AgSmart 3/4" BUSHING FOR TAIL WHEEL HUB SKU: 688-B34
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 3/4" I.D.
$2.85
 In stock, 2262 units
1"IDX1.25"ODX1" LONG TAIL WHEEL SPACER
farmranch 1"IDX1.25"ODX1" LONG TAIL WHEEL SPACER SKU: 982-911251
Axle Spacer, 1.25" O.D. x 1" I.D. x 1" long. 2 Required, for old style Bush Hog rotary cutters using two tapered roller bearings. Rotary Cutter: Bush Hog: 12, 104, 105, 109, 126, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1209, 1226, 1307, 1405, 1406.
$3.39
 In stock, 489 units
BEARING KIT
TISCO BEARING KIT SKU: BHTWK-11
Bearing Kit, for new style tail wheel. Rotary Cutter: Bush Hog: 12, 104, 105, 109, 126, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1209, 1226, 1307, 1405, 1406.
$51.74
 In stock, 108 units
SEAL
TISCO SEAL SKU: 8N3528
Seal, spindle. Dust seal with groove and offset rubber. Tractors: 8N, NAA, 600, 800 (1948-1957).
$4.99
 In stock, 59 units
CASTER ASSEMBLY
farmranch CASTER ASSEMBLY SKU: LML316
Fork, Tail Wheel, yoke shaft 1-1/4" diameter.
$65.56
 In stock, 10 units
FORK ASSEMBLY FOR TAILWHEEL
farmranch FORK ASSEMBLY FOR TAILWHEEL SKU: 12528
Fork assembly for new style tailwheel, shaft on yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole, space between forks is 6", 3/4" bolt hole.
$49.70
 In stock, 14 units
WHEEL, HUB & FORK ASBY. 1 1/2 X 1"
AgSmart WHEEL, HUB & FORK ASBY. 1 1/2 X 1" SKU: 375-484TWA
4” x 8” Tail Wheel Assembly
$220.94
 In stock, 282 units
SPINDLE
farmranch SPINDLE SKU: HUB611LS
Spindle, 1.75" dia x 13" long (w/nut).
$14.22
 Sold out
HUB ASSY W/BEARINGS & SEAL
farmranch HUB ASSY W/BEARINGS & SEAL SKU: HUB611C
$20.70
 Sold out
HUB & SPINDLE ASSEMBLY-888
farmranch HUB & SPINDLE ASSEMBLY-888 SKU: 982-283111
Transport 6 Bolt, 6" Bolt Circle, 4.62 Pilot Wheel Hub with Spindle Assembly - 3560 lb. capacity - Fits all Glencoe PDFC Model Field and all SF and TF Series Row Crop Cultivators - Use Bearing Kit BK551.
$167.52
 In stock, 202 units
SPINDLE NUT 1" 14 X .531" THICK
farmranch SPINDLE NUT 1" 14 X .531" THICK SKU: 802-SN1000
Thin spindle nut for trailers and RVs.
$5.15
 In stock, 561 units
SPINDLE
farmranch SPINDLE SKU: HUB517S
Spindle, 1.75" dia x 10" long (w/nut)
$9.19
 Only 1 unit left
BRK LINING KIT
TISCO BRK LINING KIT SKU: TP-AA4253R
Brake shoe lining kit. Set of 4 with rivets. 1-3/4" x 10-1/2". Tractors: A, G, 60, 70H, 70DH, 620H, 630H, 720H, 720DH, 730H, 730DH.
$35.17
 Only 5 units left

Recently viewed