LEVELING RODS & BOXES

Showing 1 - 24 of 33 products

MERTZ ENGINEERING CO. HYDRAULIC SIDE LINK - 3" BORE X 4" STROKE - CLEVIS x ROD END BALL 3/4" BALL I.D. SKU: HSL3203M
90° PORT OPPOSITE CLEVIS

$512.39

In stock, 24 units

FNB c/o CANSA DIS TICARET KNUCKLE. LEVELING BOX TO LIFT ARM. MASSEY FERGUSON MODELS USING 3/4" OFFSET SKU: 180853M1

$10.22

In stock, 11 units

FNB c/o CANSA DIS TICARET LH LIFT LINK NON-ADJUSTABLE. HOLE CENTERS 19-13/16" SKU: 182554M92

$55.24

Sold out

AMERITEK INTERNATIONAL GASKET. LOWER LINK SUPPORT PLATE GASKET SKU: 9N523B

$1.34

In stock, 70 units

FNB c/o CANSA DIS TICARET FORK LEVEL BOX SKU: 9N585A
RH Fork. Hydraulic lift leveling rod. 3/4" thread, length 10-1/4". Fits Massey Ferguson tractors when used with 14" shaft.

$26.49

In stock, 14 units

FNB c/o YERIK INTERNATIONAL LIFT ARM LEVELLING ASSEMBLY SKU: 873-16166
Economy Levelling Link - Fits Ford 8N, 9N, 600, 700; Massey-Ferguson 20, 30, 35 - Can replace Ford NCA577A. 18 1/2" CLOSED, 25" OPEN LENGTH, 7/8" NF THREAD.

$45.90

Sold out

FNB c/o CANSA DIS TICARET LVL ROD & YOKE SKU: E4NNN673AA
LH Rod and Yoke. 5/8" hole, 13-3/8" long, 3/4" coarse thread. Tractors with Category I. Replaces C5NNN673A.

$47.89

Only 2 units left

FNB c/o CANSA DIS TICARET LH LEVELING ROD ASSEMBLY. ADJUSTMENT 27-1/2" TO 32" SKU: E0NNB484DA

$119.79

Only 4 units left

FNB c/o CANSA DIS TICARET LH LEVELING ROD ASSEMBLY. ADJUSTMENT 21-3/4" TO 24-3/4" SKU: C7NN564B

$80.49

Sold out

FNB c/o CANSA DIS TICARET LEVELING BOX SKU: C5NN569AM
RH Leveling Box Assembly. Adjustment from 27-1/2" to 32".

$89.47

In stock, 17 units

FNB c/o CANSA DIS TICARET LEVELING BOX RH SKU: E0NN569AA
RH Leveling Box Assembly. Adjustable from 21-3/4" to 25". Replaces 81817167.

$91.04

In stock, 21 units

FNB c/o CANSA DIS TICARET GEAR. LEVELING BOX PINION SKU: B9NN568A

$22.11

Only 2 units left

FNB c/o CANSA DIS TICARET SHAFT LEVEL BOX SKU: NCA579B
Shaft and Pinion. Leveling box for hydraulic lift linkage. 14" long, 4" thread length, 3/4" thread diameter. Can replace 957E579.

$21.82

Only 3 units left

FNB c/o ARIKAN DIS TICARET LEVEL BOX ASSEMBLY SKU: NCA577A
RH Leveling Box Assembly. Rod diameter 3/4".

$67.81

In stock, 12 units

FNB c/o ARIKAN DIS TICARET LEVELING BOX ASSEMBLY WITH FORK SKU: TP-AR44549
Lift Link Assembly. Adjustable, for 2 point, 3 point link. 17-1/2" closed, 22-1/2" open, 5/8" hole on both ends.

$68.23

Only 4 units left

FNB c/o CANSA DIS TICARET SHAFT SKU: 185220M1
RH Leveling Shaft and Pinion Assembly. 10-1/2" long, 3/4" NC thread. Used on standard Massey Ferguson tractors with RH 14-1/2" yoke.

$21.96

Sold out

FNB c/o YERIK INTERNATIONAL SIDE LINK ADJUSTABLE 11-1/2" SKU: 873-1590115

$39.60

Sold out

FNB c/o CANSA DIS TICARET SHAFT AND PINION LEVELING BOX. 12-9/32" LONG, 3/4" NC THREAD SKU: 897680M2

$15.23

Only 5 units left

MERTZ ENGINEERING CO. HYDRAULIC SIDE LINK - 2" BORE x 4" STROKE - CLEVIS x ROD END BALL 3/4" BALL I.D SKU: HSL2201

$476.14

In stock, 6 units

FNB c/o ARIKAN DIS TICARET FORK LEVELING BOX. LENGTH 20" THREAD 13/16"-12. REPLACES D3NN585A SKU: E0NN585CA

$14.31

Sold out

FNB c/o YERIK INTERNATIONAL SIDE LINK ADJUSTABLE 9-1/2" TUBE SKU: 873-159950
OL is 485mm, 19.1", ball ID is .78" for a Cat 1 pin. Extended length is 22.5", collapsed length is 15.5". The fork is 13/16" inside with three sets of 1/2" holes.

$45.08

In stock, 36 units

FNB c/o YERIK INTERNATIONAL SIDE LINK. ADJUSTABLE. CENTER TUBE LEGTH 7-1/2" SKU: 873-159750
OL is 430mm, 16.9", ball ID is .78" for a Cat 1 pin. Extended length is 18.5", collapsed length is 13". The fork is 13/16" inside, with three sets of 1/2" holes.

$45.49

In stock, 7 units