tisco
tisco
868 products

Screw, machine, cross-recess, truss head with washer, coarse thread 5/16"-18NC thread.
Specifications
| For Make | International Harvester |
|---|---|
| Brand | TISCO |

Pilot bearing. Tractors: B, C, CA, D10, D12, D14, D15, D17, D17 Series IV, D19, D21, G138, G160, G226, RC, WC, WD, WD45, 170, 175, 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 600, 615, 7000.
Specifications
| Brand | TISCO |
|---|

Clutch pilot bearing. Fits in rear of the crankshaft. Tractors: Farmall Cub, Cub-Lo-Boy (not for Farmall 154 & Farmall 184).
Specifications
| Brand | TISCO |
|---|

PISTON KIT, STANDARD. CONTAINS PISTON, PIN, PIN RETAINERS, RINGS, AND ROD BUSHING
Specifications
| Brand | TISCO |
|---|

PISTON PIN BUSHINGS (4 USED PER ENGINE)
Specifications
| For Make | International Harvester |
|---|---|
| Brand | TISCO |

Piston ring set, 4.3" standard bore. 2 at 1/8" K, 1 at 1/4". Can be used as a replacement for 687429C91 ring set (6 used per engine)
Specifications
| For Make | International Harvester |
|---|---|
| Brand | TISCO |

Piston w/pin; Compression Distance 2.77
Specifications
| Bore Size | 3-7/8" |
|---|---|
| For Make | Massey Ferguson |
| Brand | TISCO |

PISTON WITH RINGS, .020" OVERSIZE
Specifications
| Bore Size | 4.4" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

PISTON WITH RINGS, .030" OVERSIZE
Specifications
| For Make | Ford_New Holland |
|---|---|
| Brand | TISCO |

PISTON WITH RINGS, 4.4" STANDARD BORE
Specifications
| Bore Size | 4.4" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

PISTON, .020" OVERSIZE
Specifications
| Bore Size | 4.4" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

PISTON, .030" OVERBORE
Specifications
| Bore Size | 4.4" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

PISTON, 4.4" STANDARD BORE
Specifications
| Length | 4.50 in |
|---|---|
| Width | 4.50 in |
| Bore Size | 4.2" |
| For Make | Ford_New Holland |
| Brand | TISCO |

PISTON, WITH RINGS, 4.4" STANDARD BORE
Specifications
| Bore Size | 4.4" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

Power steering pump and reservoir assembly. Tractors: 8700, 9700, TW5, TW10, TW15, TW20, TW25 (1983-2/1990). Replaces E0NN3K514AB.
Specifications
| For Make | Ford_New Holland |
|---|---|
| Brand | TISCO |

Power steering pump, 950 psi, 5.2 gpm, for use with O-ring fittings. Tractors: 2830, 2930, 3930, 4130, 4630, 4830, 5030 (1991 & up).
Specifications
| For Make | Ford_New Holland |
|---|---|
| Brand | TISCO |

Pressure plate, single clutch. Tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (4cyl), 4000 (4cyl), NAA. Industrials: 1801.
Specifications
| For Make | Ford_New Holland |
|---|---|
| Brand | TISCO |

11 inch independent PTO, 6 bolt, 3 lever, 29 spline, 1-7/8 inch hub. Ford/New Holland Tractors: 4000, 4110, 4200, (1969 to 9/1971), 3610, 3910, 4110, 4610, (1981 to 12/1984). Ford/New Holland Industrial: 4140, 4400, 4500, (1969 to 9/1971), 333, 334, 335.
Specifications
| Size | 11" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

25 spline, light duty springs. Tractors: Massey Ferguson: MF165, MF175, MF175 U.K., MF178 U.K., MF231, MF240P, MF240S, MF253, MF261, MF263, MF270, MF271, MF275, MF281, MF282, MF283, MF285, MF290, MF290 U.K., MF670, MF690; Industrial: 20D, 20E, 30E, 40E. Used in TISCO 3599463M92KT and 3599463M94KT
Specifications
| Size | 12" |
|---|---|
| Brand | TISCO |

12" single clutch. Ford/New Holland Tractors: 5000 (1965-9/1969 & 6/1971-1975), 5600, 5700, 6600, 6700 (1975-1981), 5610, 6610 (1981-9/1985). Replaces C7NN7563B.
Specifications
| Size | 12" |
|---|---|
| For Make | Ford_New Holland |
| Brand | TISCO |

Tractors: CUB, CUB LO-BOY. Used in TISCO 351760N-KIT
Specifications
| Size | 6-7/8" |
|---|---|
| For Make | International Harvester |
| Brand | TISCO |

Tractors: 195, 220, 226, 240, 250, 276, 1500, 1600, 1700, YMG1800, 1802, 1810, 1820, 1900, YMG2000, 2000, 2001, 2002, 2010, 2202, 2210, 2220, 2301, 2402, 2420, F20, F24, FX24.
Specifications
| Size | 8" |
|---|---|
| Brand | TISCO |

Has 6 levers and 15 spline 1" hub, for 2 stage clutch. Tractors: 600, 700, 800, 900, Dexta, Super Dexta. Used in TISCO kit 311435K
Specifications
| Size | 9" |
|---|---|
| Brand | TISCO |
Main menu

