SMA
STRUT DOOR
SKU: 144947A2
Strut for door. Overall length: 17.68", Piston Stroke: 9.23". Tractors: 3210, 3220, 3230, 4210, 4220, 4230, 4240.
In stock, 10 units
Strut for door. Overall length: 17.68", Piston Stroke: 9.23". Tractors: 3210, 3220, 3230, 4210, 4220, 4230, 4240.
Sale price$20.98
SMA
SUBSOILER POINT 1 INCH X 2-1/2 INCH X 12 INCH BOOTED/CAPPED FOR JD
SKU: 972-41B2512JDC
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2 1/2 x 12 - Capped. Uses 3/8 inch x 2 inch spring pin.
In stock, 183 units
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2 1/2 x 12 - Capped. Uses 3/8 inch x 2 inch spring pin.
Sale price$69.43
SMA
SUBSOILER POINT 1"X2-1/2"X12" BOOTED FOR JD
SKU: 972-41B2512JD
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2-1/2 x 12. Uses a 3/8" x 2" spring pin to mount
In stock, 6 units
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2-1/2 x 12. Uses a 3/8" x 2" spring pin to mount
Sale price$45.33
SMA
SUBSOILER POINT 1-1/4"X1-3/4"X11" BOOTED KMC
SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sold out
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sale price$32.80
SMA
SUBSOILER POINT BOOTED KMC
SKU: 972-34800
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
Sold out
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
Sale price$25.52
SMA
SUBSOILER POINT CAPPED FOR JD
SKU: 972-412013JDC
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
In stock, 33 units
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Sale price$70.66
SMA
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412013JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Only 3 units left
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Sale price$36.40
SMA
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412512JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
In stock, 25 units
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
Sale price$42.82
SMA
SUBSOILER POINT-LILLISTON 132
SKU: 023-15485
Booted 1" thick, 2-1/2" wide, 12" long
Only 1 unit left
Booted 1" thick, 2-1/2" wide, 12" long
Sale price$37.78
SMA
SUCTION GUN
SKU: 975-W54220
Suction Gun - No priming necessary - Perfect for transmissions, differentials, gear cases, lower units, and crankcases - 12" flexible hose - 1 pint capacity.
In stock, 11 units
Suction Gun - No priming necessary - Perfect for transmissions, differentials, gear cases, lower units, and crankcases - 12" flexible hose - 1 pint capacity.
Sale price$16.05
SMA
SUPER DUTY IMPACT WRENCH - 1/2"
SKU: 975-M625
built-in Air Regulator, 550 ft/lbs., 1/4" inlet, 3/8" Hose size, 90 PSI,8 CFM, 7000 RPM.
Sold out
built-in Air Regulator, 550 ft/lbs., 1/4" inlet, 3/8" Hose size, 90 PSI,8 CFM, 7000 RPM.
Sale price$146.70
SMA
SUPER ROLLER FOR HYPRO ROLLER PUMPS
SKU: 449-10050004
Used on 6500, 7560, 7700 Series Roller Pump
In stock, 24 units
Used on 6500, 7560, 7700 Series Roller Pump
Sale price$5.44
SMA
SUPPORT FRONT AXLE
SKU: C7NN3010F
Front axle center support. 2 inch hole. Tractors: 2000 (except 2300, 2310), 2100, 2110, 3000 (except 3300, 3310), 3100, 4100, 4110, 4140 (1965-1975), 2600 (except 2600N, V), 3600 (except 3600N, V), 3900, 4600SU, 231, 333, 335, 531 (1975-1981), 2610 (except 2610N), 2910, 3910, 230A, 234, 334, 335, 530A (1981-2/1990).
In stock, 76 units
Front axle center support. 2 inch hole. Tractors: 2000 (except 2300, 2310), 2100, 2110, 3000 (except 3300, 3310), 3100, 4100, 4110, 4140 (1965-1975), 2600 (except 2600N, V), 3600 (except 3600N, V), 3900, 4600SU, 231, 333, 335, 531 (1975-1981), 2610 (except 2610N), 2910, 3910, 230A, 234, 334, 335, 530A (1981-2/1990).
Sale price$114.24
SMA
SWEEP PLAIN HI-SPEED 1/4"X14"
SKU: 686-14HSS4
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5.
Sold out
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5.
Sale price$30.87
SMA
SWEEP PLAIN HI-SPEED 1/4"X16"
SKU: 686-16HSS4
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5. WIDTH ACROSS WING IS 2"
In stock, 80 units
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5. WIDTH ACROSS WING IS 2"
Sale price$33.45
SMA
SWEEP PLAIN HI-SPEED 1/4"X18"
SKU: 686-18HSS4
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5.
In stock, 41 units
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5.
Sale price$38.09
SMA
SWEEP PLAIN HI-SPEED 1/4"X20"
SKU: 304-1220
1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt
In stock, 55 units
1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt
Sale price$66.49
SMA
SWEEP PLAIN HI-SPEED 1/4"X24"
SKU: 304-1224
1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt width of wing 2 1/4"
In stock, 15 units
1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt width of wing 2 1/4"
Sale price$78.76
SMA
SWITCH ASSEMBLY WITH 2 KEYS
SKU: 180681M93
TRACTORS: TO20, TO30, TO35, MF35, MF50, MF65
In stock, 39 units
TRACTORS: TO20, TO30, TO35, MF35, MF50, MF65
Sale price$22.94
SMA
SWITCH FOR ELECTRIC TWINE TIE ACTIVATOR
SKU: 1055707M91
Round Balers: 634, 640, 645, 656, 1440, 1455, 1550, 1560, 1565
Only 4 units left
Round Balers: 634, 640, 645, 656, 1440, 1455, 1550, 1560, 1565
Sale price$21.63