This jack is for the rear gate of fertilizer spreaders, not designed for lift or holding a load. Has no weight rating.
DROP SHIP ITEM - Gate Pin 1.75 x 7.63 used on Models 10C, 12C, 14C, 15C Reynolds Scrapers
Gathering chain, for combines and cornpickers, number CA550, lug no. C17E. 57 links, 7 lugs, S wire connector, 10.9 lbs. each.
Specifications
| Brand | Diamond |
|---|
Fits Agco Hugger Heads 1989 to current. OEM #71505705
Cornhead gathering chain. Chain and lug no. ca550 (c11e) 49 links per chain , 8 lugs per chain, riveted connector.
Specifications
| Chain Size | CA550 |
|---|---|
| Chain Category | Gathering Chain |
| Strands | Single |
| Link Plate | Standard |
Pressure gauge, 200 PSI. 2 inch diameter, white aluminum dial, with black pointer, in an ABS case, with acrylic window and black bezel. 1/4 inch brass MNPT bottom connection. Designed for use with gas, oil, and water or any medium not corrosive to brass or bronze.
Specifications
| UPC | 758351899346 |
|---|
Pressure gauge, 60 PSI. 2 inch diameter, white aluminum dial, with black pointer, in an ABS case, with acrylic window and black bezel. 1/4 inch brass MNPT bottom connection. Designed for use with gas, oil, and water or any medium not corrosive to brass or bronze.
Specifications
| UPC | 758351899315 |
|---|---|
| Brand | AgSmart |
2 1/2" diameter case, 1/4" NPTM center back brass inlet.
GAUGE - 300 PSI LIQUID FILL SS CASE
Back mount 600 PSI Stainless Steel case.
Gauge 1/4" NPT, 0-60 PSI - Bottom Mount
GAUGE 1/4 NPT 0-160
Specifications
| UPC | 030937111913 |
|---|---|
| Brand | Milton |
Milton 1194 Pressure Gauge - 1/4 NPT - Bottom 0-160 PSI 2 In Face
Specifications
| UPC | 030937111944 |
|---|
GAUGE 1/4" - 0-300 PSI - BOTTOM MOUNT
Specifications
| UPC | 030937111951 |
|---|
GAUGE 1/4" - 0-300 PSI - CENTER MOUNT
Specifications
| UPC | 030937111920 |
|---|
Gauge cluster assembly, oil and temperature. For diesel tractors. Replaces 534057R2. Vintage Iron
GAUGE DAMPNER HYPRO PUMP
Specifications
| Brand | Hypro |
|---|
GAUGE PORT
Specifications
| Inlet Size | 3/4" |
|---|
GAUGE PRESSURE
Specifications
| UPC | 847810075909 |
|---|
For 40 & 41 Series Guages. No case studs required. Clamp attaches to groove in connection. Rings can be rotated 360°
Will replace Great Plains 814-257C, Monosem 7073.SA
Specifications
| Width | 2-1/2 Inch |
|---|---|
| Diameter | 16 Inch |
Gauge Wheel Arm and Shaft. Used on 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990 Grain Drills. Will Replace AN282117, AA73951.
Gauge wheel arm kit for 7000-7340 and 1700 series JD planters. Includes 1 ea SMA57057 and SMA57058 threaded bushings and mounting hardware. For wheel that uses cross hole stem bearing. Requires roll pin. Will replace AA41968 and A54179.