GEAR
Specifications
| UPC | 758351744578 |
|---|
GEAR & SHAFT ASSEMBLY (HEX DRIVE). FOR FPN6600A KIT
Specifications
| For Make | Ford_New Holland |
|---|
6:1 gear box for standard 5.5 hp gas engine with 3/4" Shaft. Fits pump models 9910-D30, 9910-D303 and 9910-D403. This kit can also be used with 9910-D50, 9910-D503 and 9910-D813, providing that pumps are operated at lower pressures that do not exceed 5.5 hp gas engine capability.
Specifications
| Length | |
|---|---|
| Inlet Size | 3/4" |
| Brand | AR Pumps |
GEAR DRIVE CENTRIFUGAL PUMP - 1" SOLID SHAFT
Specifications
| Inlet Connection Size | 1-1/4" |
|---|---|
| Pressure | 78 PSI |
| Gallons per Minute | 117 GPM |
| Brand | Hypro |
Cast Iron PTO Gear-Driven Centrifugal Pump - Stainless steel shaft with keyway - 540 RPM 1 3/8" PTO Hub - 15200034 mounting clip included
Specifications
| Inlet Connection Size | 1-1/4 Inch |
|---|---|
| Pressure | 78 PSI |
| Pump Type | Centrifugal Pump |
| Impeller | Nylon |
| Max Gallons Per Minute | 117 GPM |
| Max PSI Rating | 78 PSI |
| Pump Body | Cast Iron |
| Pump Drive | Gear Driven |
| Pump Port Size | 1-1/2 Inlet x 1-1/4 NPT Discharge |
| Pump Seal Material | Viton / Ceramic Seal |
| Rotation | Counter Clockwise |
| Max RPM | 600 |
| PTO Output | 1-3/8 - 6 Spline Female |
| Brand | Hypro |
Hypro 9018C-O Gear Driven Centrifugal Pump.110 GPM, 75 PSI.1-1/2" NPT Inlet x 1-1/4" NPT Outlet. Max RPM 1000, 1" Solid Shaft PTO Output.Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids. The line includes models with rugged housings of cast iron that stand up to strong chemical herbicides.
Specifications
| Length | |
|---|---|
| Inlet Connection Size | 1-1/2" |
| Pressure | 75 PSI |
| Gallons per Minute | 110 GPM |
GEAR DRIVE CENTRIFUGAL SPRAY PUMP 1-3/4" -20 SPL -1000
Specifications
| Pump Type | Centrifugal Pump |
|---|---|
| Impeller | Nylon |
| Max Gallons Per Minute | 110 GPM |
| Max PSI Rating | 75 PSI |
| Pump Body | Cast Iron |
| Pump Drive | Gear Driven |
| Pump Port Size | 1-1/2 Inlet x 1-1/4 NPT Discharge |
| Pump Seal Material | Viton / Ceramic Seal |
| Rotation | Counter Clockwise |
| Max RPM | 1000 |
| PTO Output | 1-3/4 - 20 Spline Female |
| Brand | Hypro |
GEAR FOR 310 MOTOR
Specifications
| UPC | 681056430302 |
|---|---|
| Brand | Ace |
Heavy duty chrome vanadium steel construction. Heat treated jaws. Fine thread center bolt for smooth operation. Plated to resist corrosion. Size: 2 Jaw, 5 1/2 inch reach, 6 inch spread.
Heavy duty chrome vanadium steel construction. Heat treated jaws. Fine thread center bolt for smooth operation. Plated to resist corrosion. Size: 2 Jaw, 3 1/4 inch reach, 6 inch spread.
Heavy duty chrome vanadium steel construction. Heat treated jaws. Fine thread center bolt for smooth operation. Plated to resist corrosion. Size: 2/3 Jaw, 3 1/4 inch reach, 4 3/4 inch spread.
Heavy duty chrome vanadium steel construction. Heat treated jaws. Fine thread center bolt for smooth operation. Plated to resist corrosion. Size: 2 Jaw, 3 1/4 inch reach, 4 inch spread
Specifications
| UPC | 039564871221 |
|---|---|
| Brand | Performance Tool |
Heavy duty chrome vanadium steel construction. Heat treated jaws. Fine thread center bolt for smooth operation. Plated to resist corrosion. Size: 2/3 Jaw, 3 1/4 inch reach, 7 inch spread
Heavy duty chrome vanadium steel construction. Heat treated jaws. Fine thread center bolt for smooth operation. Plated to resist corrosion. Size: 2/3 Jaw, 5 1/4 inch reach, 7 inch spread.
Fits pump models 910-D50, 9910-D503, 9910-D813, 9910-D1064 and 9910-D1265.
Specifications
| Length | |
|---|---|
| Inlet Size | 1" |
| Brand | AR Pumps |
For 4-speed transmissions. Tractors: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000 (1939-1964). Replaces 8N7277, C0NN7277
Plastic, 1.71 inch diameter, 3/8 inch NF threads. Tractors: 200B, 300B, 320B, 400B, 420B, 425, 500B, 530, 545C, 580, 580B, 584D, 585C, 585D, 586, 586C, 586D, 600, 600B, 680C, 700, 730, 800, 830, 900, 930, 1030, 1090, 2470, D, DC, S, SC, VAC, W14, W18, W20, W24, W36. Vintage Iron Tractors: Cockshutt: CO-OP E2, 20
Tractors: 9N, 2N, 8N, NAA (1939-1954). Vintage Iron
Tractors: IHC: A, Super A, AV, Super AV, B, C, Super C, Cub, Cub Loboy, Cub 154, Cub 184, Cub 185, H, Super H, M, Super M, MD, Super MD, MDTA, Super MDTA, MDV, Super MDV, MTA, Super MTA, MV, Super MV, O4, OS4, W4, O6, OS6, W6, WD6, W9, WD9, W400, W450, 100, 130, 140, 200, 230, 240, 276, 300, 330, 340, 350, 354, 400, 404, 434, 444, 450, 454, 460, 484, 504, 560, 574, 584, 600, 606, 644, 650, 654, 660, 684, 685, 784, 884; Industrial: I4, I6, ID6, I9, ID9, 2300, 2350, 2400, 2500, 3414, 3514, 3616; Crawler: T4, T5, TD5, T6, T9, TD9, TD18 (SN: 1264 & up), TD18A (SN: 22001 to 27081). Replaces: 3121549R1, 53717DA.
GEAR WITH SHAFT, FITS CAP CX2430. FOR FAIRBANKS MORSE MAGNETOS
Specifications
| Brand | TISCO |
|---|
